Shower Repair and Installation: What’s Causing That Annoying Drip or Cold Burst in Your Bathroom?
If your shower drips nonstop, has inconsistent water temperature, or low pressure, it’s time to call a professional for shower repair or installation. Small issues often point to deeper plumbing problems hiding in the walls.
At Rudy’s Plumbing Inc., we’ve helped hundreds of Kirkland homeowners restore safe, reliable showers without tearing up their bathroom.
Why Is Your Shower Dripping or Hissing?
It could be a worn-out valve, cracked cartridge, or high water pressure.
Think of your shower like a well-tuned instrument. If the valve or internal parts wear out, the system starts sounding off-key—a hiss, a drip, or a groan.
According to the U.S. Geological Survey, a slow-dripping showerhead can waste up to 500 gallons a year.
Jason, owner of Rudy’s Plumbing Inc. (License #RUDYSP1038MA), diagnoses the issue fast and replaces only what’s needed—saving your time and budget.
Struggling with Low Shower Pressure?
Build-up, pipe narrowing, or outdated plumbing may be to blame.
Many homes in Kirkland still use galvanized pipes that corrode inside, shrinking water flow over time. That’s like trying to sip a milkshake through a coffee straw.
We often solve this by flushing mineral buildup, replacing the valve, or updating your shower arm and head. For deeper problems, Jason may recommend a partial pipe upgrade.
Don’t settle for a weak rinse. Our bathroom plumbing services are built to restore full water power without the mess.
Are Sudden Cold Blasts Ruining Your Mornings?
This often points to a failed pressure-balancing valve or thermostat.
You’re enjoying a hot shower, then someone flushes the toilet and bam—ice water. That’s a pressure imbalance. Older fixtures can’t adjust on the fly.
New pressure-balanced valves or thermostatic controls fix this instantly and are required by modern plumbing codes in many areas.
At Rudy’s Plumbing, we install safe, code-compliant shower systems that keep temperature consistent, no matter what’s happening elsewhere in the house.
Planning a New Shower Installation in Kirkland?
We handle everything from plumbing to fixture setup and waterproof sealing.
Whether it’s a spa-like walk-in or a standard tub-and-shower combo, proper shower installation matters. A single missed seal can lead to mold behind tiles.
Our licensed team checks drain slopes, water lines, venting, and waterproofing before installing your new fixture. We source and install brands like Moen, Delta, and Kohler based on your needs and budget.
Our plumbing experts in Kirkland have been trusted since 1985 for quality workmanship.
Real Case: A Shower Upgrade in Kirkland Highlands
A couple in the Kirkland Highlands called us about a leaky shower and cracked tile. Jason found a faulty diverter valve and old caulking letting moisture into the wall.
We removed the damaged tile, replaced the valve, sealed the wall, and installed a sleek new rain showerhead with pressure balancing. Now their bathroom is not only stylish, but leak-free.
DIY vs. Pro: Why Shower Repairs Should Be Left to Experts
DIY fixes often miss hidden issues behind the wall, causing more damage.
Replacing a cartridge may seem easy on YouTube, but if your valve is stuck or corroded, forcing it can break the plumbing behind the wall.
We’ve seen Kirkland homeowners try to DIY and end up needing drywall repair or full re-plumbs. Save yourself the risk—Jason and our team have the right tools, training, and licensure.
Why Choose Rudy’s Plumbing Inc. for Shower Services?
- Over 20 years serving Kirkland and surrounding Eastside communities
- Fully licensed, bonded, and insured
- Honest pricing, clean workmanship, and no mess left behind
- Trusted by repeat customers and 5-star reviewers
We’re located at 160 NW Gilman Blvd Ste 306, Issaquah, WA 98027, and always nearby for fast appointments.
Reach us at (425) 643-6900 or (206) 232-8500, or email rudysplumbingsvc@gmail.com to schedule your service.
FAQs About Shower Repair and Installation
Q: How much does shower repair cost in Kirkland?
A: Most repairs cost between $150–$500 depending on the issue.
Q: Can you replace just a shower valve?
A: Yes, we can replace valves without redoing the entire wall in most cases.
Q: How long does a shower installation take?
A: Typically 1–2 days depending on the complexity and tile work.
Q: Do you offer emergency repairs?
A: Yes! Call us for urgent leaks, broken valves, or shower flooding.
Share
Related Posts
Is Your Water Filter System Secretly Failing? How to Know When to Replace It in Kirkland
Is Your Water Filter System Secretly Failing? How to Know When to Replace It in Kirkland Clean water isn’t just a luxury in Kirkland –
Tank vs. Tankless Water Heaters: Which One Truly Saves Money for Bellevue Homes?
Tank vs. Tankless Water Heaters: Which One Truly Saves Money for Bellevue Homes? When it comes to choosing the right water heater for your Bellevue
Clearing a Clogged Drain in Bellevue, WA
Clearing a Clogged Drain in Bellevue, WA: Expert Tips and Solutions Are you struggling with a clogged drain in your Bellevue home? Rudy’s Plumbing Inc.
Drain Cleaning Bellevue
Drain Cleaning Bellevue: Professional Solutions for Clogged Drains Is a clogged drain causing chaos in your Bellevue home? Rudy’s Plumbing Inc. offers expert drain cleaning